Kidd charging assembly silver viton handle

KIDD Silver Viton Charging Assembly

43 Review(s) Write a Review

Your Price: $50.00

accessory bolt handle kit

MFN: KIDD-22GRSK-SV

UPC: 810132050572

Availability: In Stock

Quantity

Description
Customer Reviews

Upgrade the bolt handle assembly in the 10/22®
Slick guide rod for easy racking
Interchangeable tuning springs:(white=standard, red=10% increase, green=10% decrease)
Handle length: 1 3/4" Weight: .6oz, Finish: stainless steel with cushion

This great upgrade kit for your 10/22® will provide you with a comfortable bolt handle to grasp, a "super slick" guide rod, and the ability to tune the recoil of your rifle with our interchangeable springs. Bolt handle length is 1 3/4", which is 1/4" longer than the factory bolt handle giving greater clearance for the shooter's knuckles while racking the bolt.

The three tuning springs come in varying tensions for the ultimate in tuning capability. The standard tension spring will serve the shooter throughout most of the different ammunition velocities. But if, due to tolerance stacking or preferred ammunition the cycling of the action is out of sync, then the shooter has the capability to change the spring without using the more primitive and permanent method of cutting coils to tune a spring.

Precision ground guide rod is made from hardened tool steel and held to 2/10,000" tolerance throughout its entire length. The rod is nitride treated which gives its surface a 70C rockwell (harder than a file) surface hardness. Guaranteed the smoothest and slickest guide rod in the industry.

Packaging Includes:

bolt handle

guide rod

3 tuning springs

Installation instructions:

After removing the stock from the barreled action, remove the trigger and bolt stop. This will allow the needed clearance for the bolt to be removed along with the bolt handle assembly. After choosing your proper spring tension slip the bolt handle assembly in from the ejection port, placing the cone end of the rod into the containment hole in the receiver. Then fully compress the bolt handle assembly while placing the bolt on it. After the mating of the bolt handle and bolt, let off the containment allowing the bolt to go forward. Install the bolt stop pin (or upgrade with our bolt buffer), trigger and stock. The video above offers some of the finer installation points.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.9

View All Reviews - Reset

Reviews Sorting

Awesome Charge Load Handle

Works great, perfect fit and there's no tension whatsoever, it's awesome I even ordered a second for another .22

Did you find this helpful?

Reviewed by: (Verified Buyer) Duane Lawrence from MA on 12/27/2024

I agree with all the positive reviews. Reduced or eliminated jams, ease of operation, etc. I have 3 of these and have no issues. Kidd is the only manufacturer I use for upgrades.

Did you find this helpful?

Reviewed by: Lou S from Middletown on 12/24/2024

Works Perfect!

I used the standard, (white spring), and it works flawlessly.

Did you find this helpful?

Reviewed by: Patrick from Hattiesburg on 12/24/2024

Worth It

I already had a Kidd barrel and then got their bolt. Replacing the old charging handle seemed like the thing to do. Just for the looks alone it was worth it, but the function is really worth it. Easier to grab and the different springs are nice to have.

Did you find this helpful?

Reviewed by: Jeremy from Minnesota on 12/9/2024

effortless action

Incredibly smooth and effortless action. 3 different rated springs included with the kit.I would highly recommend to anyone building a precision 10 22.

Did you find this helpful?

Reviewed by: Hurshell Walker from salt springs Florida on 11/18/2024

Razor

Great charging assembly for my Ruger love the pull feel and works as intended.

Did you find this helpful?

Reviewed by: Matt from Virginia on 9/26/2024

Charging handle

Smooth operator!

Did you find this helpful?

Reviewed by: Jack Billings from Anchorage on 9/6/2024

charging handle and springs

easy install was able to change springs to remove rearward felt motion of bolt and still keep 100 percent flawless function of the rifle with all of the kidd parts this rifle shooting .242 almost a one hole group at 50yds thanks again to kidd for great products.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: mike simpson from PERRY on 8/10/2024

Reg

I like the way it contrasts with black bolt. I had some difficulty compressing the spring but finally got it installed. I like it!

Did you find this helpful?

Reviewed by: Reggie Hicks from Drury, MO on 7/11/2024

Excellent

While customizing my 10 22 plinker, I detemined that the KIDD charging handle was the best way to go. It looks fantastic and works perfectly. It helps to have 3 hands to install but it is a skill that I needed to learn anyway. Good job KIDD!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Rob from Minnesota on 7/4/2024

Kidd charging assembly with black viton handle

KIDD Black Viton Charging Assembly

$50.00

Add To Cart

In Stock

KIDD Black Ring Charging Assembly

$50.00

Add To Cart

In Stock

KIDD Black 762 Charging Assembly

$50.00

Add To Cart

In Stock

KIDD Silver Viton Charging Assembly

Related Items