Kidd charging assembly silver 762 handle

KIDD Silver 762 Charging Assembly

5 Review(s) Write a Review

Your Price: $50.00

accessory bolt handle kit

MFN: KIDD-22GRSK-S762

UPC: 810132050619

Availability: In Stock

Quantity

Description
Customer Reviews

Upgrade the bolt handle assembly in the 10/22®
Slick guide rod for easy racking
Interchangeable tuning springs:(white=standard, red=10% increase, green=10% decrease)
Handle length: 1 3/4" Weight: .6oz, Finish: stainless steel

This great upgrade kit for your 10/22® will provide you with a comfortable bolt handle to grasp, a "super slick" guide rod, and the ability to tune the recoil of your rifle with our interchangeable springs. Bolt handle length is 1 3/4", which is 1/4" longer than the factory bolt handle giving greater clearance for the shooter's knuckles while racking the bolt.

The three tuning springs come in varying tensions for the ultimate in tuning capability. The standard tension spring will serve the shooter throughout most of the different ammunition velocities. But if, due to tolerance stacking or preferred ammunition the cycling of the action is out of sync, then the shooter has the capability to change the spring without using the more primitive and permanent method of cutting coils to tune a spring.

Precision ground guide rod is made from hardened tool steel and held to 2/10,000" tolerance throughout its entire length. The rod is nitride treated which gives its surface a 70C rockwell (harder than a file) surface hardness. Guaranteed the smoothest and slickest guide rod in the industry.

Packaging Includes:

bolt handle

guide rod

3 tuning springs

Installation instructions:

After removing the stock from the barreled action, remove the trigger and bolt stop. This will allow the needed clearance for the bolt to be removed along with the bolt handle assembly. After choosing your proper spring tension slip the bolt handle assembly in from the ejection port, placing the cone end of the rod into the containment hole in the receiver. Then fully compress the bolt handle assembly while placing the bolt on it. After the mating of the bolt handle and bolt, let off the containment allowing the bolt to go forward. Install the bolt stop pin (or upgrade with our bolt buffer), trigger and stock. The video above offers some of the finer installation points.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

Reviews Sorting

Great

I originally used a cheap charging handle because I didn't think it would matter, but it does. The cheap one always felt gritty and difficult to cycle. It caused reliability issues. I'm very happy with this charging handle.

Did you find this helpful?

Reviewed by: Garry from Greenville on 6/22/2024

smooth as butter

This really makes a difference when using with the KIDD receiver because together the movement is smooth as butter. You can use it with the stock 10/22 receiver but using it with the KIDD receiver makes sense because of the precise tolerance they incorporate into their work. I love the diamond cut design it sets my firearm apart from the others and gets lots of looks. Quality as always.!

Did you find this helpful?

Reviewed by: Glenn Bullard from Jesup on 6/8/2024

Charging handle

Perfect as usual!!

Did you find this helpful? 0 of 1 Found Helpful

Reviewed by: Jim from Rochester on 12/2/2020

Most have/ love it

Hello everyone I purchase this kit when I purchase the Kidd bolt and I just have to say I have not had any problems with 300 rounds and everything is so smooth. I would highly recommend purchasing this spring kit and the bolt together. Next time I got out I will do a review and post it on You Tube because if you own .22 Kidd is the way to go.

Did you find this helpful?

Reviewed by: Charles Davis from Henderson on 11/29/2020

GrandPapa

Right out of the box, my new factory 22 would stovepipe when firing CCI SV. Replaced the guide rod and installed KIDD's -10% recoil spring - No more Stovepipes.

Did you find this helpful?

Reviewed by: STEPHEN FEY from BUFFALO on 1/3/2019

Kidd charging assembly with black viton handle

KIDD Black Viton Charging Assembly

$50.00

Add To Cart

In Stock

KIDD Black Ring Charging Assembly

$50.00

Add To Cart

In Stock

KIDD Black 762 Charging Assembly

$50.00

Add To Cart

In Stock

KIDD Silver 762 Charging Assembly

Related Items