Kidd stainless steel magazine latch plunger

KIDD Magazine Latch Plunger Stainless Steel with spring

36 Review(s) Write a Review

Your Price: $15.00

magazine latch plunger stainless steel

MFN: KIDD-TG1-22PL-KIT

UPC: 810132050022

Availability: In Stock

2nd spring option

Quantity

Description
Customer Reviews

Upgrade to a Stainless Steel magazine latch plunger for your 10/22®
Hardened stainless steel with standard spring included
Better magazine hold

Replace your factory magazine latch plunger (part B-36 & B-37) with a new KIDD stainless steel version. With upgraded geometry to both hold your magazine more stable and let it release easier. Your choice of an additional spring tension; standard or 25% higher tension for more resistance.

Installation instructions:
Push out the magazine lever pin and pull the magazine lever down while slightly pressing in on the magazine latch plunger. Once the magazine lever is out the plunger will pull out of the trigger guard completely. After slipping the magazine latch plunger into the spring slide it in the trigger guard. While holding the plunger slightly depressed, put the magazine lever back in the trigger making sure it fits in the cut out of the plunger properly, then put the pin back in the magazine lever to hold everything in place. Function the magazine lever to make sure that the plunger is retracting as it is supposed to retract.

Package includes:
magazine latch plunger
spring

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.9

View All Reviews - Reset

Reviews Sorting

Magazine catch

Nice fit and finish , a very welcomed upgrade over the original

Did you find this helpful?

Reviewed by: Earl LeBlanc from Louisiana on 4/15/2025

Owner

Just bought a new Ruger Charger and the 15 round magazine was sloppy fitting. Ordered this kit with the heavier spring...easy install...and it tightened up the magazine noticibly. Excellent quality. Would recommend to anyone looking for more reliability.

Did you find this helpful?

Reviewed by: John A Schnacke from Indiana on 4/10/2025

Must Have!

This made my jam-o-matic 22 takedown completely reliable with every ammunition type. I was having failure to feed issues with standard velocity. The rifle would only function with high velocity. Once I put in the plunger (and extra strength spring), I couldn't make the thing fail. 25, 15, and 10 round magazines all functioned flawlessly. KIDD parts are quality parts!

Did you find this helpful?

Reviewed by: Jacob L from Alabama on 3/27/2025

Must Have

If you have a polymer trigger housing and use BX-25s, the enhanced Kidd Magazine Latch with the high tension spring is a must have. It seriously snugs up the loose fit of the BX-25 in the magwell. I put these in all my polymer units.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: John from Anywhere, USA on 3/18/2025

Quality

Works just like it should.

Did you find this helpful?

Reviewed by: KwB from Marsing on 3/9/2025

The magazine latch plunger with the heavier duty spring helps tighten up the magazine as it seats in the receiver. Big help stopping stovepipes.

Did you find this helpful?

Reviewed by: Mark from Oklahoma on 2/27/2025

Quality Product

Works as intended, quality product from a quality company

Did you find this helpful?

Reviewed by: (Verified Buyer) Miles Schulte from North Carolina on 2/26/2025

Solved mag issue

Just recently picked up this plunger with the additional heavier spring and now my mags fit tighter in my 1022 great quality awesome piece. It sold my droopy mag issue

Did you find this helpful?

Reviewed by: Jon Hansen from Vancouver on 1/28/2025

Just what I needed.

Item was shipped quickly and was easy to install. It seems to be a quality part and is working as expected so far.

Did you find this helpful?

Reviewed by: Greg Hollis from Indiana USA on 12/21/2024

A must do Mod

Had feeding problems with 25 round mags, Someone suggested trying this before doing some sort of mod to the magazine. Worked so good, now all six of my 10/22's have it with the HD spring. On a 10/22, this should be the 2nd you change, The trigger is number one on the list.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: (Verified Buyer) Ron Barwick from Panama City on 11/3/2024

KIDD "Trigger Job" Kit Black with Hammer, Sear, Disconnect, and Trigger blade

$127.00

Select Options

In Stock

Kidd silver trigger job kit with hammer, sear, disconnect and trigger blade

KIDD "Trigger Job" Kit Silver with Hammer, Sear, Disconnect, and Trigger blade

$127.00

Select Options

In Stock

Magazine Latch Plunger Spring - Heavy

$4.50

Add To Cart

In Stock

KIDD Magazine Latch Plunger Stainless Steel with spring

Choose Options

Average Customer Ratings

Related Items