Kidd firing pin with spring

KIDD Firing Pin

12 Review(s) Write a Review

Your Price: $29.50

firing pin

MFN: KIDD-22FP

UPC: 810132050053

Availability: In Stock

Quantity

Description
Customer Reviews

Upgrade accessory for the 10/22® bolt
Achieve consistent ignition
Positive rim indentation
Properly hardened steel
Precision ground and wire EDM cut holding 0.0001" tolerance

Eliminate irregular rim indentation due to a blunt or improper firing pin. Our KIDD Firing Pin made from a wire EDM machine replaces the tool and die process of stamping out the factory firing pin. This difference in production results in a much higher quality part for your rifle.

Installation Note:

The compression spring is directional in nature due to one end being conical. When installing the spring be sure to keep the big end toward the bolt face and the smaller end (conical) towards the rear.

Packaging includes:

firing pin

spring

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.9

View All Reviews - Reset

Reviews Sorting

Firing Pin

My 10/22 started having misfires and noticed minimal denting on the cartridges. Decided to replace the factory pin with the Kidd firing pin. Ordering was simple and new firing pin/spring arrived quickly. Noticed right away the upgrade in quality and material hardness. Pin was simple to install and worked great. Haven’t had a misfire since install.

Did you find this helpful?

Reviewed by: Russel Langford from Smiley, Texas on 5/26/2025

100%

Put this in my old 10/22 which was misfiring horribly. I haven't had a single misfire in over 200 rounds so far. Better than new!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Walker from Ashland on 2/6/2025

Great Quality

Vs the factory pin+spring, the fit and feel is noticeably better. My goal with this pin was to help ignition on very cheap Armscor ammo. Previously it was about 50% fail rate, with this it's between 30-40% so an improvement but not as much as I'd hoped.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Brian Noonan from Colorado Springs on 8/19/2024

Great Firing Pin

Began having light strikes with my factory firing pin. Replaced it with the Kidd firing pin and the gun runs flawlessly with the new pin. Shot two Steel Challenge Matches with it and no light strikes.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Tony Barr from Mooresville, NC on 4/28/2024

Works great

Steel replacement is great.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Dana MacDonald from Az on 3/27/2024

Kidd firing pin

Awesome firing pin. I replaced the pin, springs and extractor and I have ran approximately 1000 rounds through the gun with no problems at all. I will use Kidd products for all my future builds.

Did you find this helpful? 3 of 4 Found Helpful

Reviewed by: Davin T Sowle from Mustang on 3/24/2024

Firing pin

Part of a rebuild to freshen and give new life to an old gun. Great parts always available nice to get parts in a day or two depending on where your located. ALWAYS FAST SHIPPING.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Karen from Burnet on 3/23/2024

Firing Pin and Spring

Easy install as per KIDD video. Went to the range today. 100 rounds of CCI SV. No misfires. You can really see a deeper casing strike with this new pin. Excellent upgrade!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Charlie from Florida on 2/18/2024

Very nice, absolutely no FTF after about 350 rounds of bulk Thunderbolt ammo, plus a some others. The picture doesn't do it justice. Mine appeared smoother looking and I thought better than the website picture. I'll admit the coil pin on my rifle was hard to get out, but after some muscle all is very good. I'm very pleased with the performance vs stock.

Did you find this helpful? 9 of 9 Found Helpful

Reviewed by: Dane from Minnesota on 12/5/2017

No FTF's

Installed the firing pin a few days ago, got to test it out today. 200 rounds no FTF. Another excellent KIDD modification..... This stock Ruger is slowly evolving into a whole new Rifle. I would recommend this to everyone.

Did you find this helpful? 12 of 12 Found Helpful

Reviewed by: (Verified Buyer) Rick Winters from Kansas City, Mo on 2/17/2017

KIDD Guide Rod & Spring Kit

$15.50

Add To Cart

In Stock

KIDD Bolt Handle -Silver with Black Viton

$34.50

Select Options

In Stock

KIDD Bolt Handle -Black 762

$34.50

Select Options

In Stock

KIDD Firing Pin

Related Items