KIDD Extractor

I ordered this extractor to replace the not-so-reliable one in my 10/22. My gun would not cycle Federal Automatch from a BX 25 magazine consistently. After looking at the casings, I could see the extractor wasn't up to snuff. After replacing it, I put 250 rounds through without a problem. It's amazing what one tiny part will do to make your gun function great! Thanks Kidd!!!!

Got a new 10/22 and did even fire it until I replaced the extractor with this upgraded unit. Easy installation and years of trouble free service ahead!

A must have for your Ruger 10/22. Works well with all ammo including subsonic with manual bolt pull back and rounds from different manufacturers with no initial misfeeds. It is a very hard well machined part. Tony Kidd has produced another winner.

Make sure you use a small tool (like an awl), steady hands, and have a 2nd pair of eyes at the ready... My finger slipped while putting this in, and the spring and plunger went flying. Thankfully I was able to locate both, but I was freaking out until I did. The product is well made and I should have no problems using it.

This is what a 10/22 extractor should be. I was having an extraction problem every 2 to 3 rounds. I installed the Kidd unit and have not had a single malfunction since. Don't even think about it, just get it. Oh and by the way, go ahead and get the bolt buffer. It's another no brainer.