Kidd charging assembly black 762 handle

KIDD Black 762 Charging Assembly

7 Review(s) Write a Review

Your Price: $50.00

accessory bolt handle kit

MFN: KIDD-22GRSK-B762

UPC: 810132050688

Availability: In Stock

Quantity

Description
Customer Reviews

Upgrade the bolt handle assembly in the 10/22®
Slick guide rod for easy racking
Interchangeable tuning springs:(white=standard, red=10% increase, green=10% decrease)
Handle length: 1 3/4" Weight: .3oz, Finish: anodized aluminum

This great upgrade kit for your 10/22® will provide you with a comfortable bolt handle to grasp, a "super slick" guide rod, and the ability to tune the recoil of your rifle with our interchangeable springs. Bolt handle length is 1 3/4", which is 1/4" longer than the factory bolt handle giving greater clearance for the shooter's knuckles while racking the bolt.

The three tuning springs come in varying tensions for the ultimate in tuning capability. The standard tension spring will serve the shooter throughout most of the different ammunition velocities. But if, due to tolerance stacking or preferred ammunition the cycling of the action is out of sync, then the shooter has the capability to change the spring without using the more primitive and permanent method of cutting coils to tune a spring.

Precision ground guide rod is made from hardened tool steel and held to 2/10,000" tolerance throughout its entire length. The rod is nitride treated which gives its surface a 70C rockwell (harder than a file) surface hardness. Guaranteed the smoothest and slickest guide rod in the industry.

Packaging Includes:

bolt handle

guide rod

3 tuning springs

Installation instructions:

After removing the stock from the barreled action, remove the trigger and bolt stop. This will allow the needed clearance for the bolt to be removed along with the bolt handle assembly. After choosing your proper spring tension slip the bolt handle assembly in from the ejection port, placing the cone end of the rod into the containment hole in the receiver. Then fully compress the bolt handle assembly while placing the bolt on it. After the mating of the bolt handle and bolt, let off the containment allowing the bolt to go forward. Install the bolt stop pin (or upgrade with our bolt buffer), trigger and stock. The video above offers some of the finer installation points.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

Reviews Sorting

Kidd charging handle

The perfect addition to my custom built rifle. Top quality and service, fast shipping. I now have 3 Kidd charging handles absolutely the best.

Did you find this helpful?

Reviewed by: Darrin D Long from Keokuk on 5/16/2024

Cycles all ammo!!

This made my 10-22 cycle cci quiet and cci suppressor ammo. This is a must purchase for your rifle. Very clean and satisfying sliding motion aswell. You don't need any crazy new firefly bolt to cycle cci quiet ammo just get this kit. If you do this kit you might aswell get the kidd rubber buffer for the bolt to bounce off of quieter. Also makes it easier because that bolt retaining pin always falls out when you remove the stock.

Did you find this helpful?

Reviewed by: Brayden Johnston from Yelm wa on 5/4/2024

Always Quality Parts

Well-made, high-quality part, as we've all come to expect from KIDD. Fits perfect, looks great, and most importantly, functions as intended. Nice, smooth action. Glad to have this as part of my build.

Did you find this helpful?

Reviewed by: (Verified Buyer) Devin Moore from Charleston, SC on 3/26/2024

target shooter

Replaced firing pin ,extractor and charging handle. Was having failure to feed and fire problems. Ran 100 rounds after installing Kidd parts . Rocks again- all problems cured !! Have a complete rifle from 14 yrs ago built by Kidd never any problem after thousands of rounds !! Excellent products .

Did you find this helpful?

Reviewed by: keith van poperin from mi. on 6/12/2020

I had some problems wrestling the parts into place, but now that I have gotten through that one time, taking it down and back together again will be a snap. This upgrade fits better and works better than stock. Don't forget to upgrade you bolt at the same time.

Did you find this helpful?

Reviewed by: Harry Settle from Bemidji Minnesota on 6/5/2020

Must Have

As far as I am concerned this charge handle kit is a must have to start any improvements in the 10-22 performance. I was having quite a few FTE stovepipes even after installing a aftermarket Volquartsen ejector. I installed the KIDD charge handle kit using the white spring. So much smoother charge handle operation and no more stovepipes no matter what brand or velosity ammo I used.

Did you find this helpful?

Reviewed by: Lee Collins from Montana on 5/14/2020

Great Bolt handle

I ordered this because a friend said they maid great parts so I ordered a bolt handle it fit great looks great and performs amazing. Very happy with my purchase:)

Did you find this helpful?

Reviewed by: Zander from Springfield or on 1/22/2018

Kidd charging assembly with black viton handle

KIDD Black Viton Charging Assembly

$50.00

Add To Cart

In Stock

KIDD Black Ring Charging Assembly

$50.00

Add To Cart

In Stock

Kidd charging assembly silver 762 handle

KIDD Silver 762 Charging Assembly

$50.00

Add To Cart

In Stock

KIDD Black 762 Charging Assembly

Related Items