10/22® Auto Bolt Release aftermarket upgrades by KIDD

KIDD Auto Bolt Release

15 Review(s) Write a Review

Your Price: $13.50

MFN: KIDD-TG1-22ABR

UPC: 810132050039

Availability: In Stock

Quantity

Description
Customer Reviews

Upgrade your 10/22® bolt hold open to an auto bolt release
Rack the bolt with a simple pull
No gunsmith required for installation
Manufactured from steel cut by laser

The KIDD Auto Bolt Release will replace your factory bolt hold open in the 10/22® trigger. This upgrade will allow the shooter to simply pull back on the bolt handle when the bolt is locked back to allow the bolt to go forward. No more fiddling with the factory bolt hold open to allow the bolt to go forward.

All KIDD complete trigger units come with the auto bolt release as standard, but this product can be used to upgrade your current factory trigger.

Replacement instructions:

With the trigger removed from the receiver push the ejector pin and magazine release latch pin 1/3 of the way out starting from the bolt hold open side of the trigger. Pull out the current bolt hold open then slide in the KIDD Auto Bolt release. Push the two pins back through. Check if it functions correctly by depressing the portion close to the magazine release lever to see if the top side of the auto bolt release toggles up.

Package includes:

Auto Bolt Release

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

View All Reviews - Reset

Reviews Sorting

Smart Choicw

Messing with the bolt mechanism on the Ruger 10/22 is a huge hassle and as far as I’m concerned a safety issue. My 14 year old who shoots junior rifle and has his own CZ 457 bolt action hates how it works which led me to research, albeit late to the party, to get a remedy. I chose to try KIDD and it was a very smart decision. After purchasing a new BX trigger I ordered an 1) auto bolt release, 2) bolt buffer, 3) extended mag release and 4) receiver pins. I installed all these items on the BX trigger and had it installed back on the stock in about 45 minutes taking my time. I am by no means a gunsmith. After everything was put back together we tested and my son and I cannot believe how much these items make a difference. Simple release of the bolt, quieter operation with the viton bolt buffer, very smooth operation of the extended mag release and the receiver pins don’t fall out with the KIDD ones. Now I’m thinking of getting the “KIDD Trigger Kit” and rehabbing the original trigger setup. Out of control the wife says.

Did you find this helpful? 8 of 8 Found Helpful

Reviewed by: Chris from MA on 8/30/2020

Installed this in my factory trigger assy while making upgrades to my 50yo rifle almost solely due to the review comments at this site. I changed out the mag drop lever at the same time. Only recommendation I have is to not fumble the installation by losing control of the process and have almost all of the trigger mechanism parts fall out on the bench.

Did you find this helpful? 2 of 3 Found Helpful

Reviewed by: (Verified Buyer) Harry Settle from Bemidji on 6/5/2020

Works great

Quality product and fast shipping!

Did you find this helpful? 0 of 1 Found Helpful

Reviewed by: Christopher Sagaysay from Hawaii on 10/3/2019

Every 10/22 Needs This!

Great product! This is a huge improvement, over the stock bolt release. Just pull back and send the bolt home.

Did you find this helpful? 1 of 2 Found Helpful

Reviewed by: Phil N from MN on 1/17/2018

Sr. Engineeering Tech

I had heard good things about Ruger, so I bought a 10 22. From the get go I was absolutely underwhelmed by the stock bolt release mechanism... Blindingly frustrating, trying to get that bolt to slide forward ..... I watched YouTube videos on how to remove the little plate, file the little valentine heart piece down etc, with no luck! I looked online, found that you guys had an after market plate that you said would do the trick. I am delighted with the result!! No more battling the bolt/bolt release tab etc .... I'd recommend this part to anyone! (I had called Ruger customer service to complain, they said they were aware of the problem, but the 10 22 was used by Boy Scouts etc, and they seemed to think that the mechanism as is, would be a good safety feature!) Good job Kidd!

Did you find this helpful? 28 of 29 Found Helpful

Reviewed by: Roy Patterson from San Jose, Ca. on 5/8/2017

KIDD Interchangeable magazine release levers in Black

KIDD Magazine Release Levers-Interchangeable System -Black

$42.50

Add To Cart

In Stock

KIDD Magazine Latch Plunger Stainless Steel

$15.00

Select Options

In Stock

Magazine Latch Plunger Spring - Higher Tension

$4.50

Select Options

In Stock

KIDD Auto Bolt Release

Related Items