My Account

Kidd Innovative Design, LLC BBB Business Review
Home > 10-22 KIDD Barrels

Ruger 10-22 Match Bull Barrel

Part Number 42
review 4 Review(s)
Ruger 10-22 Match Bull Barrel
10/22 Ultimate Match Stainless Steel Bull Barrel
Email a friend Email a friend
Write a Review Write a Review
Retail Price:  199.95
Your Savings:  19.95
Your Price:   199.95
On sale: 
On Sale
In Stock
Share |
Choose Options
Length, Color & muzzle options
Add to Gift Registry
Our aftermarket replacement for the Ruger 10-22 bull barrel is the ultimate performer in accuracy.  Our stainless steel 10-22 barrel is guaranteed to group 1/2" at 50 yards.  This bull barrel will slip into your Ruger 10-22 receiver or other aftermarket 10-22 receiver.  It comes in three lengths 20", 18", 16.5" and the stainless steel finish is offered in a polished or bead blast.
We believe these are the finest barrels on the market, each one is hand lapped. Our stainless steel barrel is bored and rifled by Lothar Walther in Germany. Tony Kidd then performs all the final machining to make our match barrel a worthy KIDD product. A proprietary chamber reamer is used to ensure the cartridge and bullet feed smoothly.  Our barrels are chambered to accept .22 LR ammo and have a 1:16 twist.  Our muzzle threading is .475"x 1/2"-28 and is available with a protective cap or muzzle brake. 

The unique convex extractor slot eliminates extraction problems by ensuring the extractor is always in perfect alignment with the case rim. Why doesn't everybody use this extractor slot? Because the tooling is very expensive and requires tolerances be held very close for proper machining. Each barrel receives an 11 degree crown and the double ring logo at the muzzle.  Our 20" bull barrel weighs 3.5 lbs, 18" weighs 3.3 lbs, and our 16.5" weighs 3.1lbs.
We can offer such a great price on this barrel because we don't sell to distributors, only retail and dealer pricing are offered, therefore we don't have to increase our price to compensate for 3 tier pricing. There are cheaper barrels out there but as with all KIDD products, "you get what you pay for." 

To avoid "barrel droop," check your clamp to make sure you only have moderate tension on the screws. We tighten them to around 10 inch pounds which is just snug enough to keep the barrel from moving forward. No more than this, as even the slightest tension moves the barrel and receiver out of alignment.

Barrel installation: 

Depending on your receiver, if there is paint build up in the receiver where the barrel extension is inserted, be sure to scrape that out. If the barrel is tight, use an anti-seize compound to assist in installation. It is best if you can get the barrel started, then turn it over and tap the back of the receiver with a rubber mallet. Be sure to line the extractor slot up as you are installing the barrel. Your barrel is ready to shoot, just run two magazines through it before you really start looking at group size. Do this each time you change brands of ammunition as well. Keep the chamber clean, but don't clean the bore too much you will decrease accuracy. Depending on the ammo, clean the bore around every 500 rounds.

Customer Reviews
Rating Get one!
Fantastic barrel! flawless finish, beautiful packaging, and it shoots better than I do... I think the one I have likes SK match and eley club the best, but performs outstanding with just about anything. All the Kidd products I have used are top-notch, now just maybe a super grade....
  Reviewed by:   from Greeneville, TN. on 4/12/2013
Rating WOW
Went to the range today, just to see how things worked. Shot approximately 100+ rounds. Not a single hang up or jam. Barrel is so awesome, just the wow factor alone. Just for fun put it on paper after the first 100. Nice group at 30 yds, I was impressed to say the least. thanks ==A. Ruland Up State NY
  Reviewed by:   from Range. on 7/26/2011
Rating Barrel
This barrel is simply fantastic ! Sub MOA groups at 50 and 100 yards. .3-.4 inch 5 shot groups at 50 using Eley Match and Lapua Center-X. Thanks for a great product ! Just ordered the two stage trigger.
  Reviewed by:   from Virginia. on 6/6/2010
Rating Excellent
This is an excellent barrel. I installed it today and took it to outdoors for some plinking with some American Eagle (Federal) crap ammo. I was doing some pretty accurate shooting keeping my groups under 1" and the fit and finish is just top notch. I can't wait to try it out with some match grade ammo at the range.
  Reviewed by:   from Ohio. on 12/25/2009
Related Items
Ultra Lightweight Ruger 10-22 Barrel
Ultra Lightweight Ruger 10-22 Barrel
Average Rating 1 Review(s)
Your Price: 185.00
Straight Tapered Ruger 10-22 Match Barrel
Straight Tapered Ruger 10-22 Match Barrel
Average Rating 0 Review(s)
Your Price: 215.00
On sale: 190.00 On Sale
Fluted Match Ruger 10-22 Barrel
Fluted Match Ruger 10-22 Barrel
Average Rating 0 Review(s)
Your Price: 240.00
On sale: 209.00 On Sale
Ruger 10-22 Lightweight Barrel
Ruger 10-22 Lightweight Barrel
Average Rating 1 Review(s)
Your Price: 245.00
On sale: 209.00 On Sale
Browse Similar Items